Cellwood PG50SAMPLE N3 Guia de Instalação descarregar pdf (Página 82)

leaf relief

leaf relief

80

Installing Leaf Relief

®

on Half-Round Gutters

continued

Mitering Corners continued

For Inside Corners:

Use perforation pattern as a guide to

create corners. Using tin snips, cut

diagonally along the perforation to

create a 45° angle, starting at the rear

edge and cutting as shown. Notch

and remove one inch of the front

edge from the newly formed angle

(Figure 1).

When mounted, the pieces will

overlap one inch and form a 90°

inside corner. Place one screw

through the overlapping pieces

(Figure 2).

NOTE: To prevent overflow, all

inside corners and valleys must have

a water diverter/deflector. Diverter/

deflector must be installed on the top

surface of Leaf Relief

®

.

Fig. 1

Fig. 2

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88 89 90

Comentários a estes Manuais

Sem comentários